Cisco – Enabling Web-Based Configuration

Posted on by

Configuring a Cisco router can be done using various methods, including the command-line interface (CLI) and web-based interface. In this article, we will focus on configuring a Cisco router using its web-based interface.

Step 1: Accessing the Web-Based Interface

To access the web-based interface of your Cisco router, you need to open a web browser and enter the IP address of your router. The default IP address is usually 192.168.0.1 or 192.168.1.1. If you are not sure about the default IP address of your router, check your router’s documentation or contact your internet service provider.

Step 2: Logging into the Web-Based Interface

Once you have accessed the web-based interface, you will see a login page with two fields: username and password. The default username is usually “admin,” and the default password is also “admin.” However, it’s recommended to change these default credentials as soon as possible to improve security.

Step 3: Accessing Configuration Mode

After logging into the web-based interface, you need to access configuration mode by clicking on the “Config” button or using the shortcut command “conf t“

# conf t

This will take you to the configuration mode where you can make changes to your router’s settings.

Step 4: Enabling HTTP Server

To enable the HTTP server, which allows you to access the web-based interface remotely, execute the following command:

# ip http server

This will enable the HTTP server on port 80.

Step 5: Disabling HTTP Server (Optional)

If you want to disable the HTTP server, simply execute the following command:

# no ip http server

This will disable the HTTP server and prevent remote access to your router’s web-based interface.

Final Conclusion:
Congratulations! You have successfully configured your Cisco router using its web-based interface. Remember to always change the default credentials and secure your router’s configuration to prevent unauthorized access.

Note: It is recommended to use a secure connection (HTTPS) instead of HTTP when accessing your router’s web-based interface remotely. Also, make sure to keep your router’s firmware up to date to ensure you have the latest security patches and features.